Sunday, August 15, 2010

ATX Power Supply Conversion



I had a bunch of old ATX power supplies laying around, so I decided to convert one into a bench power supply until I could find one. The on/off switch on the right is hooked up to the green wire and black wire of the 20pin connector. I also brought out a hand full of grounds (black banana plugs), as well as +12V, +5V, and +3.3V. It's kind of hard to see in the photo but I also added a small LED to the left of the switch to indicate power status.

2 comments:

  1. The next day he came back into my office and said:power professionals

    ReplyDelete
  2. The Shores Of Las Vegas, NV - Mapyro
    The 구리 출장샵 Shores Of Las Vegas is a place to stay 하남 출장안마 if you're 제주 출장샵 in the Strip. Whether you're seeking the accommodations for 상주 출장마사지 a Las Vegas vacation or for the 의왕 출장안마

    ReplyDelete